If you are in a position of wanting a wheelchair ramp it is a fine idea to look at the needs. In the majority of cases these are made to exact measurements which are already required by the American Disability Act thus one only have to choose which sort you will need. You can obtain static and portable wheelchair ramps. This writing is regarding the different types of wheelchair ramps and where you can get them.
If one find yourself wanting a wheelchair ramp for yourself, or for a family member it is important to understand what you need to do in order to secure one. You must also make sure though the person building your ramp is knowledgeable regarding the standard requirements. There are loads that were built which are either dangerous for the person to employ, or are not accessible.
There are a lot of things to think about if purchasing wheelchair ramps, if it would be static or portable wheelchair ramps. There are two points to think about:
The Degree of Incline
Many people do not understand aerodynamics, so they assume a lenght of light wood over steps will solve the problem for the person in the wheelchair. This is a fool hardy idea because a ramp can be too inclined for the individual to use if not properly made. Assuming that the ramp is going to last, it is a good idea to make it as long as you can. This makes an ideal way for it to be employes by folk who want to walk up the ramp, and it will insure that the wheelchair owner will not fall over backwards as they go up.
The majority of manufacturers of wheelchair ramps recommend a one foot to 12 foot ratio. In other words, if the ramp is going to be one foot high, it should be 12 feet long; if the individual is elderly you will want to increase the 12 feet to 18 feet.